LABOFILL PRO- CORDLESS ELECTRONIC PIPETTE FILLER DEVICE

The new pipette filling device LaboFill Pro was designed to simplify pipetting operations offering high precision and accuracy thanks to an integrated solenoid valve for precise control of liquid.

The instrument is designed for serial pipetting operations, and its particular shape also makes it ideal for use under a fume hood.

With its innovative “force touch” technology interface, magnetic buttons and integrated sensors, LaboFill pro allows researchers and laboratory professionals to tackle complex pipetting operations in a safe and accurate way.

LaboFill Pro is suitable for all standard pipettes from 1 ml to 100 ml, both in plastic and glass.

TECHNICAL SPECIFICATIONS

·         Possibility to select the capacity of the serological pipette to adjust the filling and dispensing speed range.

·         High aspirating speed: 25 ml in only 3 seconds

·         Force Touch Technology allows to control the suction and dispensing speed by pressing the plunger buttons

·         By lightly pressing the plunger, the instrument dispenses in Gravity Mode. This mode does not engage the motor and allows the user to dispense dropwise.

·         Silicone universal pipette housing can accommodate both plastic and glass pipettes with capacity from 1 ml to 100 ml. Inside collet knurling facilitates tight fit during pipetting operations.

·          Large 1” OLED display for pipette capacity selection

·         A 0,2 microns PTFE hydrophobic membrane filter avoids aerosol formation and liquid entering the instrument body

·         Rechargeable Li-ion battery provided within the instrument (3,4 V / 1400 mAh) offers up to 8 hours of continuous battery operation. Completely battery recharging in 3 hours.

·         LED indication for low battery (red) and charging (yellow). The yellow LED turns off when the battery is fully charged. The instrument offers direct charging via micro-USB port with Type C charging cable.

·         Pipette housing and membrane filter can be fully autoclavable at +121 °C and 15 psi for 10-15 minutes.